> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://clockworks.crisp.help/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Changing a Clock Cable


### Changing a Clock Cable

Changing a clock cable requires the movement to be out of the clock case. These instructions refer to post WW2 modern [grandfather units](https://www.clockworks.com/clock-movement.html) of German origin, however all makes have a similar method. Swapping the cable is easy. There is a big hole and a little hole on the cable mount.


[![](https://storage.crisp.chat/users/helpdesk/website/-/9/5/9/1/9591a3f915bf7800/cable_15uv2x4.jpg =253xauto)](https://www.clockworks.com/product/grandfather-clock-replacement-cable)
###                                                                           Click on the picture to shop Clock Cable on Clockworks.com


The [cable](https://www.clockworks.com/product/genuine-replacement-cable-for-grandfather-clocks) end fits into the big hole, then slides over to seat into the little hole. When the lock is set, it seats in securely. It's the same basic theme on both ends of the [cable](https://www.clockworks.com/product/genuine-replacement-cable-for-grandfather-clocks), meaning, one slot being in the cable drum itself and the other on the movement.

### The cable drum side of the cable

To remove, lift the cable up from the oblong hole on the drum and slide it over to the big side. The cables have ends made of brass on them. These get slid over from the small side of the slot on the cable drum to the larger slot. It will release so as to remove it from the clock movement.


[![](https://storage.crisp.chat/users/helpdesk/website/-/9/5/9/1/9591a3f915bf7800/drum-hermle_kkj41q.jpg =288xauto)](https://www.clockworks.com/product/hermle-1161-grandfather-clock-cable-drum)
###                                                                    Click on the picture to shop Hermle Cable Drum on Clockworks.com


### The other end of the cable

The movement itself would normally have the plates set for the cable ends. The cables have round brass ends on them and these lock into a plate on the movement.

This plate will have a small hole leading to a big hole. To remove the cable it requires only lifting the end and moving over to the big hole and out.


*The content of this website is copyright by [Clockworks Inc.](https://www.facebook.com/ClockworksUSA)