> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://clockworks.crisp.help/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# German Mechanical-Clock Hand Installation


### German Mechanical-Clock Hand Installation

The installation of a German Mechanical-Clock Hand on a [German mechanical movement](https://www.clockworks.com/clock-movement.html) is quite simple. It is simply the opposite of the [removal](https://www.clockworks.com/posts/removing-the-mechanical-clock-hands) process.

The minute hand must go through some adjustments if you are replacing the movement. Also if the hands are new. This is so it will point to the correct [time when it chimes](https://www.clockworks.com/posts/mechanical-clock-chime-on-time).

[![](https://www.clockworks.com/wp-content/uploads/2020/11/hand.fix_.wtr_.jpg)](https://www.clockworks.com/product-category/all-clock-parts/clock-hands/mechanical-clock-hands)
###                                                      Click on the picture to shop Mechanical Clock Hands on Clockworks.com


### Installing the hour hand

First comes the hour hand. The hour hand is simply a friction fit. All you have to do is put the hand on its round post. Then twist and push toward the front of the dial.

Make sure that it is not in contact with the [dial](https://www.clockworks.com/product-category/all-clock-parts/clock-dials/grandfather-clock-moon-dials) at any point during the rotation.


[![](https://storage.crisp.chat/users/helpdesk/website/-/9/5/9/1/9591a3f915bf7800/moon-dial_16qdzzt.jpg)](https://www.clockworks.com/product-category/all-clock-parts/clock-dials/grandfather-clock-moon-dials)
###                                                                 Click on the picture to shop Moon Dials on Clockworks.com


This includes the base of the hour hand. It cannot rub against the hole that is in the clock face. So, the clock can stop at any point if the hour hand touches anything. You can turn the hand to point to whatever hour it is because it is only a friction fit.

### Installing the minute hand

Second, comes the minute hand. Install the minute hand by lining up the the square hole in the hand with the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. Push the hour hand down further onto the tube if the minute hand is rubbing.

Therefore, it is imperative to check the positioning of the hands to ensure they are not touching anything. Once the minute hand is on its square post, it's time to put the [handnut]  (https://www.clockworks.com/product/german-clock-hand-nuts) on.

[![](https://storage.crisp.chat/users/helpdesk/website/-/9/5/9/1/9591a3f915bf7800/hand-nuts_hwkhc9.jpg)](https://www.clockworks.com/product/german-clock-hand-nuts)
###                                                         Click on the picture to shop Clock Hand Nuts on Clockworks.com


Tighten the nut with your fingers and then use a pair of needle nose [pliers](https://en.wikipedia.org/wiki/Pliers) to make it secure. It does not have to be extremely tight. However you need to ensure it is tight enough so that the hands do not come loose as they go around the clock.