What is a 261 Hermle Clock Movement?
Knowledge Base
Hermle 261 clock movement series
This is a nice chain driven wall clock movement. The screw or nail in the wall will have to take some weight so be sure it's well anchored. There are two weights hanging on this movement. Each weighing close to 5 lbs each. This unit was used in the Dutch style clocks with the pear weights. Subsequently it is a good replacement for the same using the 261-080 movement.
Correspondingly, if you order the clock movement, you are ordering just that. The movement comes with the chains, hand nut, leader and suspension spring. These units do not include the clock weights, pendulum, dail, hands or chimeblock.
This Hermle 261 clock movement is an easy install as it mounts with only two screws underneath. Once the weights and pendulum are off, and the hands out of the way, there are only two screws underneath the movement to remove. The movement comes out and the new one goes in. Comes with instructions and a factory 3 year warranty. Now even if there are questions long after the warranty expires, even years later, if you have a question we will answer and help with the clock. This is your advantage from making your purchase from a family of clock makers with literally 100 years of experience. Alternate choice of course being making the purchase from a place that knows nothing about what they sell.
Movement restoration instead of getting the new one will cause to spend 2 or 3 times the cost of the new movement. The old unit can't possibly be restored to the point of being in a better condition than a brand new one. Get the movement in a few days, instead of waiting a few months. The movement up and running in a week or two, accomplished by yourself. We ship everyday from MA USA, there is no delay and no waiting.
The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Last Updated: 2 months ago in
Hermle 261 clock movement series
Article sections
Hermle 261 clock movement
This is a nice chain driven wall clock movement. The screw or nail in the wall will have to take some weight so be sure it's well anchored. There are two weights hanging on this movement. Each weighing close to 5 lbs each. This unit was used in the Dutch style clocks with the pear weights. Subsequently it is a good replacement for the same using the 261-080 movement.
The movement
Correspondingly, if you order the clock movement, you are ordering just that. The movement comes with the chains, hand nut, leader and suspension spring. These units do not include the clock weights, pendulum, dail, hands or chimeblock.
The Hermle 261 clock movement support
This Hermle 261 clock movement is an easy install as it mounts with only two screws underneath. Once the weights and pendulum are off, and the hands out of the way, there are only two screws underneath the movement to remove. The movement comes out and the new one goes in. Comes with instructions and a factory 3 year warranty. Now even if there are questions long after the warranty expires, even years later, if you have a question we will answer and help with the clock. This is your advantage from making your purchase from a family of clock makers with literally 100 years of experience. Alternate choice of course being making the purchase from a place that knows nothing about what they sell.
The speed
Movement restoration instead of getting the new one will cause to spend 2 or 3 times the cost of the new movement. The old unit can't possibly be restored to the point of being in a better condition than a brand new one. Get the movement in a few days, instead of waiting a few months. The movement up and running in a week or two, accomplished by yourself. We ship everyday from MA USA, there is no delay and no waiting.
The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Last Updated: 2 months ago in
Related Articles
Updated on: 05/08/2022
Thank you!