> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://clockworks.crisp.help/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# What Is the Hermle 791-081 Clock Movement?

### Hermle 791-081
If your grandfather clock has stopped chiming or keeping time and you’ve found “**Hermle 791-081**” stamped on the back plate of the movement, you’re in the right place. This model is a well-known, high-quality **German cable-driven clock movement** found in many top-tier grandfather clocks sold over the past several decades. At Clockworks, we regularly help customers identify, replace, and restore this exact model.
In this article, we’ll walk you through what makes the Hermle 791-081 unique, how to properly replace or service it, and what parts you’ll need to complete the job right the first time.

## What Is the Hermle 791-081 Clock Movement?
The [**Hermle 791-081**](https://www.clockworks.com/product/791-081-hermle-clock-movement) is a **mechanical, cable-driven, triple-chime movement** made in Germany. It runs for 8 days on a full wind and powers three separate trains: time, chime, and strike. The movement includes a **triple chime selection** (Westminster, Whittington, or St. Michael), with quarter-hour chimes and hourly strike.
This model powers some of the most prestigious floor clocks, offering:
* Smooth operation
* Deep, rich chime tones
* Precise timekeeping
* Long-term durability with proper maintenance
If you own a Howard Miller, Ridgeway, or another premium [grandfather clock](https://www.clockworks.com/product-category/clock-movements/mechanical-movements/mechanical-clock-kits/grandfather-clock-kits), there’s a good chance the 791-081 powers it.

## How Do You Identify a Hermle 791-081 Movement?
To identify this movement, remove the clock’s [dial](https://www.clockworks.com/product-category/all-clock-parts/clock-dials) or view the back of the movement inside the case. Look for a **stamp on the brass back plate** that reads something like:
**“Hermle 791-081”**
Sometimes followed by a [pendulum](https://www.clockworks.com/product-category/all-clock-parts/german-mechanical-clock-pendulums) length (e.g., “114cm”) and a date code (e.g., “94” for 1994).
The “791” refers to the series, and “081” refers to the specific model within that series.
If you’re unsure about the model, take clear photos of the front and back of the movement and measure the **pendulum length** and **hand shaft**. Clockworks can confirm the movement for you and help recommend a compatible replacement.

## What Makes the 791-081 Different from Other Hermle Movements?
The 791-081 stands out due to several key features:

### 1.** Cable-Driven Operation**
Unlike chain-driven movements, the 791-081 uses **steel cables** wound around drums and [pulleys](https://www.clockworks.com/product-category/all-clock-parts/mechanical-grandfather-clock-weights). This setup is smoother and more refined, often found in high-end clock models.

### 2.** Triple Chime Functionality**
This movement includes three selectable chime melodies. A switch on the dial or side of the case lets you choose between:
* Westminster (classic Big Ben style)
* Whittington (flourishing and lyrical)
* St. Michael (bright and regal)

### 3.** Durability**
The 791-081 is built with **hardened pivots**, **brass plates**, and quality gearwork that, with proper care, can run reliably for decades.

## What Parts Come with a Hermle 791-081 Replacement Kit?
When you order a replacement movement kit from Clockworks, we include:
* **Brand new [Hermle 791-081 movement](https://www.clockworks.com/product/791-081-hermle-clock-movement)** (not refurbished)
* **New [chains](https://www.clockworks.com/product/grandfather-grandmother-clock-chain) or [cables](https://www.clockworks.com/product/grandfather-clock-replacement-cable)**, depending on the drive system
* **Pendulum [leader](https://www.clockworks.com/product/mechanical-clock-pendulum-leader-2) and [suspension spring](https://www.clockworks.com/product/clock-pendulum-suspension-springs-assortment)
* [**Hand nut](https://www.clockworks.com/product/german-clock-hand-nuts) and [mounting hardware](https://www.clockworks.com/product/clock-movement-bar-mounts-set-of-4)
You can also order the movement **pre-oiled** and tested if you prefer a ready-to-run solution.
If your original movement is more than 25–30 years old, replacement is often better than repair. New movements are built to exacting standards and come with a warranty.

## Can I Install the 791-081 Movement Myself?
Yes—with care and attention to detail. Many DIY clock owners successfully install their replacement movement at home using simple tools. Here’s what you’ll need:
* [Screwdrivers](https://www.clockworks.com/product/clock-screw-driver-set-7pc)
* [Pliers](https://www.clockworks.com/product/clock-repair-small-plier-set)
* A [level](https://www.clockworks.com/product/mechanical-clock-bubble-level) (for accurate pendulum setup)
* Time and patience
Installation steps include:
1. **Remove the dial and hands carefully**
2. **Disconnect the weights and pendulum**
3. **Unscrew and remove the old movement**
4. **Install the new movement with the included hardware**
5. **Attach the pendulum leader and suspension spring**
6. **Reinstall [hands](https://www.clockworks.com/product-category/all-clock-parts/clock-hands/mechanical-clock-hands), [chime rods](https://www.clockworks.com/product-category/all-clock-parts/mechanical-clock-chime-rods), and [weights](https://www.clockworks.com/product-category/all-clock-parts/mechanical-grandfather-clock-weights)

## Should I Repair or Replace the 791-081?
If your Hermle 791-081 movement has never been serviced, is over 25 years old, or is showing signs of wear (such as poor chime quality, inconsistent ticking, or gear play), we strongly recommend **replacing** it instead of repairing.
Re-bushing and cleaning an older movement can cost more than a new one—and doesn’t guarantee the same long-term performance. Plus, modern replacements from Clockworks come **pre-tested, factory-oiled**, and ready to install.

## Final Thoughts: Restore Your Clock with Confidence
The **Hermle 791-081** is one of the most reliable, elegant mechanical movements in today’s grandfather clock world. If your movement has stopped functioning or you’re planning a restoration, replacing it with a new factory-direct model is the best way to bring your clock back to life.
At Clockworks, we carry **brand-new 791-081 movements**, complete kits, and every compatible part you might need to install or upgrade. We also offer expert email support, full printed instructions, and a wide range of tools, chime accessories, and oil kits to keep your clock running for generations.
For help identifying or ordering a Hermle 791-081 movement, contact us at [**clockworks@clockworks.com**](mailto:clockworks@clockworks.com) or visit [www.clockworks.com](https://www.clockworks.com/).